| MODEL | HSJ-90-2412 | HSJ-90-3612 | HSJ-90-4812 | ||||
| OUTPUT | OUTPUT NUMBER | CH1 | CH2 | CH1 | CH2 | CH1 | CH2 |
| DC VOLTAGE | 12V | 24V | 36V | 12V | 48V | 12V | |
| RATED CURRENT | 3.5A | 2A | 2A | 1.5A | 1A | 3.5A | |
| RATED POWER | 90W | 90W | 90W | ||||
| RIPPLE&NOISE | 120mVp-p | 240mVp-p | 300mVp-p | 120mVp-p | 400mVp-p | 120mVp-p | |
| VOLTAGETOLERANCE | ±2.0% | ±6.0% | ±2.0% | ±5.0% | ±4.0% | ±4.0% | |
| LINEREGULATION | ±0.5% | ±1.5% | ±0.5% | ±1.0% | ±0.5% | ±0.5% | |
| LOADREGULATION | ±0.5% | ±3.0% | ±0.5% | ±2.0% | ±3.0% | ±3.0% | |
| SETUP.RISEHOLD.TIME | 500ms, 30ms/230VAC 1200ms, 30ms/115VAC at full load | ||||||
| HOLD TIME | 80ms/230VAC 16ms/115VAC at full load | ||||||
| INPUT | VOLTAGE RANGE | 88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) | |||||
| FREQUENCYRANGE | 47~63HZ | ||||||
| EFFICIENCY | 84% | 85% | 86% | ||||
| AC CURRENT | 0.8A/115VAC 0.5A/230VAC | ||||||
| INRUSH CURRENT | COLD START 36A/230VAC | ||||||
| LEAKAGECURRENT | <2mA/240VAC | ||||||
| PROTECTION | OVERLOAD | 110~150% rated output power | |||||
| Protection type: Hiccup mode,recovers automatically after fault condition is removed | |||||||
| OVER VOLTAGE | YES | YES | |||||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||||||
| ENVIRONMENT | WORKING TIMP | -25~+70°C (Refer to "Derating Curve") | |||||
| WORKINGHUMIDITY | 20~90% RH non-condensing | ||||||
| STORAGE TEMP HUMIDITY | -40~+85°C 10~95%RH | ||||||
| TEMPCOEFFICIENT | ±0.03%/ °C(0~50°C) on CH1 output | ||||||
| VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||||||
| SAFETY&EMC | SAFETYSTANDARDS | U60950, TUV EN60950 approved | |||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||||
| ISOLATIONRESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | ||||||
| EMC EMISSION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 | ||||||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A | ||||||
| QTHERS | MTBF | 179Khrs min. MIL-HDBK-217F (25°C ) | |||||
| DIMENSION | 100*83*38mm (L*W*H) | ||||||
| PACKING | 0.4Kg; 30PCS/13Kg | ||||||
