Factory Direct AC220V To DC 60V800W Switch Mode Power Supply

AC220V to DC 60V800W Switch Mode Power Supply

Features: ● Huyssen Power Supply 60V 13.4A ● AC input 110/220VAC ●Single output power: 800W ● Protections: Short circuit / Overload / Over voltage / Over temperature ● Cooling by fan ● Withstand 300vac surge input for 5 second ● Conformal coated ● LED indicator for power on ● Low cost, high reliability ● 100% full load burn-in test ● 2 years warranty

Specifications:

MODEL		HSJ-800-60
OUTPUT	DC VOLTAGE	60V
	RATED CURRENT	14A
	CURRENT RANGE	0 ~ 14A
	RATED POWER	800W
	RIPPLE & NOISE (max.) Note.2	600mVp-p
	VOLTAGE ADJ. RANGE	54~ 66V
	VOLTAGE TOLERANCE Note.3	±3.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±2.0%
	SETUP, RISE TIME	2500ms, 50ms/230VAC
	HOLD UP TIME (Typ.)	20ms/230VAC
INPUT	VOLTAGE RANGE	90 ~ 132VAC / 176 ~ 264VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	86%
	AC CURRENT (Typ.)	1.2A/230VAC 0.6A/230VAC
	INRUSH CURRENT(Typ.)	60A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVER LOAD	105 ~ 140% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	28~ 29V
	OVER VOLTAGE	Protection type :Hiccup mode, recovers automatically after fault condition is removed
	OVER TEMPERATURE	Shut down O/P voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20 ~ +60°C (Refer to derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0~50°C)
	VIBRATION	10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY	SAFETY STANDARDS	U60950-1 approved
	WITHSTAND VOLTAGE Note 6	I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
OTHERS	MTBF	235K hrs min. MIL-HDBK-217F (25°C )
	DIMENSION	24512565mm (LWH)
	PACKING	1.3Kg; 10pcs/14Kg/0.79CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation.

Applications:

Widely used in : Billboards, LED Lighting ,Display screen, 3D Printer, CCTV camera, Laptop, Audio ,Telecommunication ,STB , Intelligent robot, Industrial control, equipment, Motor, etc.